Mazurov Power Solutions
Replacement Li-Ion Battery for 3M Speedglas Adflo PAPR
Replacement Li-Ion Battery for 3M Speedglas Adflo PAPR
Couldn't load pickup availability
⚠️ Battery only. The Adflo PAPR unit shown in photos is not included and is used for compatibility reference only.
Overview
A precision-engineered lithium-ion replacement for the 3M Speedglas Adflo PAPR system. Designed for direct compatibility and daily industrial use — fully cycle-tested before dispatch.
The housing is constructed from ASA thermoplastic — UV-stable and abrasion-resistant, chosen specifically for environments where standard ABS degrades. Weight has been reduced through shell geometry optimization without any reduction in cell capacity or structural integrity.
Modular Latch System
The latch mechanism uses a field-replaceable modular design. The latch engages the Adflo rail with increased retention force compared to standard aftermarket units, and if the latch is ever damaged, it can be replaced independently — without replacing the entire battery pack.
Universal Charging Port & 12V Output
These batteries use a standard 5.5×2.5mm barrel connector in place of the proprietary OEM charging port. The connector is fitted with a rubber dust cap to protect against contamination when not in use. This means:
- Compatible with any 12.6V Li-Ion charger using the 5.5×2.5mm standard
- The same port can be used as a 12V DC output to power accessories
A matching 12.6V charger is included with every order.
Compatibility
- Direct lock-in fit for standard Adflo battery rails
- Replaces OEM part numbers: 837630, 837631, 35-1099-07
Select Capacity
| 3.2Ah | 5Ah | 6.4Ah | |
|---|---|---|---|
| Runtime | Up to 7 hrs | Up to 12 hrs | Up to 15 hrs |
| Weight | ~230g | ~310g | ~380g |
| Thickness | 28mm | 28mm | 28mm |
| Best for | Short shifts, backup | Full-day standard shifts | Overtime, extended ops |
Runtime figures established under laboratory conditions using 2016+ Adflo units with new OEM filters at room temperature. Real-world results vary with filter condition, ambient temperature, and flow rate.
Pre-2016 units may draw higher current and could show reduced runtime. Earlier Adflo units were originally designed for NiMH chemistry — these units apply a higher low-voltage cutoff threshold, which may limit access to the bottom 20%+ of usable capacity. The battery is 100% compatible and fully functional across all Adflo generations.
Quality & Testing
- Brand-new high-grade 18650/21700 lithium-ion cells
- Every unit fully cycle-tested prior to packaging
- 12-month replacement warranty against manufacturing defects
What's Included
- 1× Li-Ion Battery Pack (selected capacity)
- 1× 12.6V Li-Ion Charger (5.5×2.5mm)
Share
Ordered the 5Ah for my Adflo unit. Fits perfectly on the rail, no wobble or play. Been using it for three weeks on full shifts and runtime matches what was advertised. Charger included works fine.
Third shift work means I run two batteries in rotation. Both Adflo units have held up over six weeks without any capacity drop. The ASA housing handles the shop environment well.
Lead time was exactly as stated. Battery arrived tested and ready to go. The 3.2Ah is lighter than I expected which is a plus for overhead work. Would order again.
Running 12+ hour shifts in a shipyard. The extended capacity handles it without issue. Housing feels durable and the rubber port cover is a nice detail for our environment.
The OEM battery was going to cost me nearly as much as a new unit. This one arrived well-packaged and cycle-tested as described. After two months of regular use no issues to report.