Mazurov Power Solutions
DeWalt 20V MAX Battery Adapter for 3M Speedglas Adflo PAPR
DeWalt 20V MAX Battery Adapter for 3M Speedglas Adflo PAPR
Couldn't load pickup availability
⚠️ Adapter only. DeWalt 20V battery and Adflo PAPR unit are not included and are used for reference in photos only.
Overview
Engineered specifically for the DeWalt 20V MAX platform. Powers the 3M Speedglas Adflo PAPR from any DeWalt 20V MAX battery — the blower receives full signal data and operates identically to OEM battery operation. If you already run DeWalt on the job, your existing batteries now power your respirator as well.
Built-in protection against deep discharge of your battery.
| Mazurov Power Solutions | Typical Adapter | |
|---|---|---|
| Blower compatibility | Full OEM signal emulation | Power feed only |
| Housing | Sealed, screw-free assembly | Screwed enclosure |
| Contact design | OEM-spec geometry — no force on blower terminals | Spring-loaded or primitive contacts — inconsistent connection |
| Vibration resistance | Absorbed by modular latch mechanism | Spring tension or none |
| Voltage regulation | Active buck converter | Passive or basic |
| Deep discharge protection | Built-in | Varies or none |
| Housing material | ASA — UV and abrasion resistant | ABS or PETG |
| Warranty | 12 months — replacement or full refund | 30–90 days, conditions apply |
On contact design
Spring-loaded pins apply continuous lateral force against the blower's terminal interface. Over time this deforms the contacts — and when you reinstall an OEM battery, it no longer seats correctly. The contacts in this adapter are dimensioned to OEM spec. Vibration is absorbed mechanically through the latch system, not through spring tension against the blower terminals.
Electronics
- Active buck converter — regulated voltage output across the full DeWalt 20V MAX discharge curve
- Deep discharge protection — DeWalt cell is never drawn below its rated minimum
- Full 3-pin signal emulation — blower receives correct data at all times
Estimated Runtime
| DeWalt 20V Battery | Estimated Runtime |
|---|---|
| 3.0Ah | Up to 10 hrs |
| 5.0Ah | Up to 16 hrs |
| 6.0Ah | Up to 20 hrs |
| 8.0Ah | Up to 26 hrs |
Based on standard Adflo operating conditions with new OEM filters at room temperature.
Construction
- Housing: ASA thermoplastic — UV-stable, abrasion-resistant
- Assembly: Sealed, screw-free enclosure
- Contacts: OEM-spec geometry
- Latch: Modular, field-replaceable
- Manufactured by Mazurov Power Solutions
Compatibility
- Compatible with all DeWalt 20V MAX batteries (including FLEXVOLT in 20V mode)
- Fits: 3M Speedglas Adflo PAPR (standard battery rail)
- No tools required, no modifications to the PAPR unit
Warranty
12-month replacement warranty. If the adapter stops working within 12 months and there is no physical damage or signs of moisture ingress — replacement or full refund. No ambiguity.
What's Included
- 1× DeWalt 20V MAX to Adflo Battery Adapter
Share
